1967–1972 Chevy C10 Crown Victoria Front Suspension Mounting Kit

Bring modern suspension, steering, and braking to your classic Chevy. The Range Industries Crown Victoria Front Suspension Mounting Kit allows you to install a 2003–2011 Crown Victoria front suspension assembly in your 1967–1972 Chevrolet C10.

Based on the same mounting system used in our F100 kits, this kit adapts the Crown Victoria front suspension to the C10 chassis. It includes the mounting brackets and associated hardware needed to secure the donor assembly, giving your build a foundation for improved road manners and everyday drivability.

The brackets bolt to the top, bottom and outside of your frame for an ultra rigid connection and accurate wheel placement.

Application:

• 1967–1972 Chevrolet C10

• For use with a 2003–2011 Ford Crown Victoria front suspension assembly

What’s Included:

• Front suspension mounting brackets

• Lower control arm mounts

• Associated mounting hardware

What You Will Need:

• 2003–2011 Crown Victoria front suspension assembly

• Wheels with an appropriate offset and brake clearance

A Note on Steering shaft:

• We recommend running a 24" aftermarket steering column to allow for the best geometry in the steering shaft. This puts the upper U-joint of the steering shaft inside the cab.

Fitment Notes:

• Mounting kit only; donor suspension assembly is not included.

• Uses the Crown Victoria’s 5 x 4.5" wheel bolt pattern.

• Not compatible with lower control arms using a 20mm shoulder on the mounting stud.